Linerless Self-Amalgamating Rubber Splicing Tape

Item No.: WT-RT-130C
Material: EPR
Regular Size:0.76mm*9.1m*19/25/38mm

零售价

0.0

元

市场价

0.0

元

浏览量:

1000

产品编号

WT-RT-130C

所属分类

Tape

Quantity

库存:

关键词:

Linerless Self-Bonding Tape

3M 130C Tape



Product Details

[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[产品参数, 参数]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]

　Description

Linerless Self-Amalgamating Rubber Splicing Tape

No lining insulation, flame retardant self-adhesive tape, the substrate is ethylene propylene rubber, excellent flame retardant properties. Rated up to 90˚C continuous operating temperatures and short-term 130˚C overload service. It can be used for the insulation, flame retardant and heat dissipation of the cable terminal and the joint, which has excellent electrical performance and can be applied to 69KV

　Dimensions

Color	Black
Size	0.76mm19mm9m
	0.76mm25mm9m
	0.76mm38mm9m
Other size can be customized as your requirement.

　Specification

Property	Value	Test Method
Thickness	0.8 mm	ASTM D4325
Tensile strength	1.34 Mpa	ASTM D412-06
Elongation at break	1200%	ASTM D412-06
Anti ozone aging （5010-8, 40℃24h,free state placement)	0 grade (No crack）	ASTM D4325
Dielectric Strength (KV/mm)	26.5 KV/mm	ASTM D4325
Dielectric Strength (normal temperature*24h,medium:distilled water)	25.5 KV/mm	ASTM D4325
Dielectric Strength (23℃RH96%96h)	21.2 KV/mm	ASTM D4325
Dielectric constant	2.9 ε	ASTM D4325
Dielectric constant（90℃*24h)	2.8 ε	ASTM D4325
Flame Rating（Vertical)	V-0	UL94
Xenon-arc exposure @200h	Pass	ASTM D4325

　Feature

· Linerless, self-bonding primary insulating tape rated up to 69 kV.
· High thermal conductivity.
· Flame retardant.
· Excellent physical and electrical properties.
· Physical and electrical properties unaffected by degree of stretch.
· Compatible with common, solid dielectric cable insulation.
· Designed to insulate splices and terminate cables whose overload temperatures can reach 130°C.
· Wide range of temperature.
· Weatherproofing.

　Application

· Primary insulation for splicing all types of solid dielectric insulated cables up to 69 kV.
· Up main insulation 35KV solid medium cable stress cone when making application.
· Intermediate joint and terminal protection.
· Moisture seal for electrical connection.
· Bus insulation.
· Cable end sealing.
· Wire for electric motor.
· Jacket repairs.

　Installation

1. Should be always successive half-lapped ;
2. The side of the tape wrapped inside the roll should be applied outside on the splice (tacky side up);
3. Use highly elongate the tape in critical areas;
4. Use less elongation in less critical areas；
(Normally, the tape is stretched to ¾ of its original width in these less critical areas)
5.When using tape for splicing cable above 15 kV, always highly elongate the tape throughout the entire splice.

Related Products